View CDK-2000-LCO_4360907.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CS2300-02
1x, 2x, 4x, and 8x Clock Multiplier with Internal LCO
Features
Clock Multiplier / Jitter Reduction - Generates a Low Jitter 6 - 75 MHz Clock from a Jittery 750 kHz to 30 MHz Clock Source Internal LCO Reference Clock 128 Hz Loop Filter Bandwidth Selectable Multiplication Factors - 1x, 2x, 4x, and 8x Output Enable Pin Lock Indicator Minimal Board Space Required - No External Analog Loop-filter Components
Ordering Information
The CS2300-02 is available in a 10-pin MSOP package in Commercial (-10C to +70C) grade. Customer development kits are also available for custom device prototyping and device evaluation. Please see "Ordering Information" on page 2 for complete details.
Pin-Out Diagram
VD GND CLK_OUT LOCK CLK_IN
1 2 3 4 5 10 9 8 7 6
M0 M1 OUT_EN FILTN FILTP
General Description
The CS2300-02 is an extremely versatile system clocking device that utilizes a programmable phase lock loop. The CS2300-02 is based on a hybrid analog-digital PLL architecture comprised of a unique combination of a Delta-Sigma Fractional-N Frequency Synthesizer and a Digital PLL. This architecture allows for generation of a low-jitter clock relative to an external noisy synchronization clock with frequencies as low as 750 kHz. The CS2300-02 is a CS2300-OTP device that has been preconfigured at the factory. There are three hardware configuration pins available for mode and feature selection.
Hardware Controls Settings
M1 0 0 1 1 M0 0 1 0 1 PLL_OUT
1x CLK_IN 2x CLK_IN 4x CLK_IN 8x CLK_IN
OUT_EN 0 1
CLK_OUT
Enabled High Impedance
FILTP
0.1 F
LOCK FILTN
LCO
PLL Lock Indicator 6 MHz to 75 MHz PLL Output Output Enable/Disable
Fractional-N Frequency Synthesizer
M[1:0] 00=1x 01=2x 10=4x 11=8x
Output to Input Clock Ratio
CLK_OUT
Ratio Selection
M1 M0
N OUT_EN
750 kHz to 30 MHz Frequency Reference
CLK_IN
128 Hz BW Digital PLL & Fractional N Logic
VD
0.1 F 1 F
3.3 V
GND
Advance Product Information
http://www.cirrus.com
This document contains information for a new product. Cirrus Logic reserves the right to modify this product without notice.
Copyright (c) Cirrus Logic, Inc. 2008 (All Rights Reserved)
February '08 PS855A1
CS2300-02 1. PIN DESCRIPTIONS
Pin Name
VD GND CLK_OUT LOCK CLK_IN FILTP FILTN OUT_EN M1 M0
2. SPECIFICATIONS
Please see the CS2300-OTP datasheet for package information, device characteristics, and specifications except where noted due to specific programming options.
#
1 2 3 4 5 6 7 8 9 10
Pin Description
Digital Power Ground PLL Clock Output Active Low PLL Lock Indicator Clock Input LCO Filter Connections Active Low CLK_OUT Enable Input Mode Selection Inputs
3. OPERATIONAL INFORMATION
Complete operational information can be found in the CS2300-OTP datasheet. Specific operational details dictated by the programming of the CS2300-02 are included below. * The PLL clock output is forced to 0 when the PLL is unlocked, both upon loss of the CLK_IN signal or briefly when switching mode pin configurations. The minimum loop filter bandwidth once locked is 128 Hz.
See the CS2300-OTP datasheet for additional pin description information.
*
4. CONFIGURATION INFORMATION
The CS2300-02 has been factory pre-programmed with a unique configuration. The following table outlines the specific configuration profile which can be compared to the CS2300-OTP datasheet for detailed functional descriptions.
OTP Modal and Global Configuration Parameters Form Mode 0 Mode 1 Ratio 0 (dec) 1 2 Ratio 0 (hex) 00:10:00:00 00:20:00:00 RModSel1 0 0 RModSel0 0 0 AuxOutSrc1 1 1 AuxOutSrc0 1 1 AutoRMod 0 0 Global Configuration Set ClkSkipEn AuxLockCfg ClkOutUnl LFRatioCfg M2Cfg2 0 0 0 1 0 ClkIn_BW2 ClkIn_BW1 ClkIn_BW0 1 1 1 Mode 2 4 00:40:00:00 0 0 1 1 0 M2Cfg1 0 M2Cfg0 0 Mode 3 8 00:80:00:00 0 0 1 1 0
5. ORDERING INFORMATION
Product
CS2300-02 CDK-2000
Description
Clocking Device Evaluation Platform
Package
10L-MSOP -
Pb-Free Yes Yes
Grade Commercial -
Temp Range Container
Rail -10 to +70C -
Order# CS230002-CZZ
Tape and CS230002-CZZR Reel CDK-2000-LCO
PS855A1
2
CS2300-02 6. REVISION HISTORY
Release
A1 Initial Release
Changes
Contacting Cirrus Logic Support
For all product questions and inquiries, contact a Cirrus Logic Sales Representative. To find one nearest you, go to www.cirrus.com.
IMPORTANT NOTICE "Advance" product information describes products that are in development and subject to development changes. Cirrus Logic, Inc. and its subsidiaries ("Cirrus") believe that the information contained in this document is accurate and reliable. However, the information is subject to change without notice and is provided "AS IS" without warranty of any kind (express or implied). Customers are advised to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, indemnification, and limitation of liability. No responsibility is assumed by Cirrus for the use of this information, including use of this information as the basis for manufacture or sale of any items, or for infringement of patents or other rights of third parties. This document is the property of Cirrus and by furnishing this information, Cirrus grants no license, express or implied under any patents, mask work rights, copyrights, trademarks, trade secrets or other intellectual property rights. Cirrus owns the copyrights associated with the information contained herein and gives consent for copies to be made of the information only for use within your organization with respect to Cirrus integrated circuits or other products of Cirrus. This consent does not extend to other copying such as copying for general distribution, advertising or promotional purposes, or for creating any work for resale. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE ("CRITICAL APPLICATIONS"). CIRRUS PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN PRODUCTS SURGICALLY IMPLANTED INTO THE BODY, AUTOMOTIVE SAFETY OR SECURITY DEVICES, LIFE SUPPORT PRODUCTS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF CIRRUS PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK AND CIRRUS DISCLAIMS AND MAKES NO WARRANTY, EXPRESS, STATUTORY OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, WITH REGARD TO ANY CIRRUS PRODUCT THAT IS USED IN SUCH A MANNER. IF THE CUSTOMER OR CUSTOMER'S CUSTOMER USES OR PERMITS THE USE OF CIRRUS PRODUCTS IN CRITICAL APPLICATIONS, CUSTOMER AGREES, BY SUCH USE, TO FULLY INDEMNIFY CIRRUS, ITS OFFICERS, DIRECTORS, EMPLOYEES, DISTRIBUTORS AND OTHER AGENTS FROM ANY AND ALL LIABILITY, INCLUDING ATTORNEYS' FEES AND COSTS, THAT MAY RESULT FROM OR ARISE IN CONNECTION WITH THESE USES. Cirrus Logic, Cirrus, and the Cirrus Logic logo designs are trademarks of Cirrus Logic, Inc. All other brand and product names in this document may be trademarks or service marks of their respective owners.
PS855A1
3

▲Up To Search▲

Price & Availability of CDK-2000-LCO

	To Download CDK-2000-LCO Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .